| View previous topic :: View next topic |
| Author |
Message |
Shurick
Joined: 15 May 2005
Posts: 524
Location: Russia, Moscow.
|
 Posted: Wed Oct 12, 2016 3:03 am Post subject: Flywheel dimensions |
 |
|
I need to know it thickness. From crankshaft flange to clutch disk area.
Does anyone have this info? Or maybe someone have a flywheel laying around to measure it?
_________________
WBR, Shurick
'79 931 -- intercooled K26-3060-6.10 turbo @ 1.2 bar, EFI+EDIS, 951S brakes, stripped interior, 951 look.
'86 924S -- R.I.P.
https://www.instagram.com/ru_pacecar/ |
|
| Back to top |
|
 |
Fifty50Plus
Joined: 28 Feb 2008
Posts: 1422
Location: Washington DC area
|
| Posted: Wed Oct 12, 2016 8:01 am Post subject: |
|
|
I measured 24.5 mm from the flywheel face through the bolt holes to the clutch face. I don't know if my 931 flywheel has been turned or not.
_________________
1979 924 NA race car H-Prod SCCA
1982 924 NA race car - Sold
1981 924 Turbo sold
1982 924 Turbo sold
1972 911 E race car - traded for Cayenne Diesel
1975 914 1.8 Building for H-Prod SCCA |
|
| Back to top |
|
|
Shurick
Joined: 15 May 2005
Posts: 524
Location: Russia, Moscow.
|
| Posted: Thu Oct 13, 2016 9:09 pm Post subject: |
|
|
| Fifty50Plus wrote: | | I measured 24.5 mm from the flywheel face through the bolt holes to the clutch face. I don't know if my 931 flywheel has been turned or not. |
Thanks a lot!
_________________
WBR, Shurick
'79 931 -- intercooled K26-3060-6.10 turbo @ 1.2 bar, EFI+EDIS, 951S brakes, stripped interior, 951 look.
'86 924S -- R.I.P.
https://www.instagram.com/ru_pacecar/ |
|
| Back to top |
|
|
Shurick
Joined: 15 May 2005
Posts: 524
Location: Russia, Moscow.
|
| Posted: Thu Oct 13, 2016 11:40 pm Post subject: |
|
|
| Fifty50Plus wrote: | | I measured 24.5 mm from the flywheel face through the bolt holes to the clutch face. I don't know if my 931 flywheel has been turned or not. |
Do the clutch face sit flush with spring plate mounting surface?
_________________
WBR, Shurick
'79 931 -- intercooled K26-3060-6.10 turbo @ 1.2 bar, EFI+EDIS, 951S brakes, stripped interior, 951 look.
'86 924S -- R.I.P.
https://www.instagram.com/ru_pacecar/ |
|
| Back to top |
|
|
Fifty50Plus
Joined: 28 Feb 2008
Posts: 1422
Location: Washington DC area
|
| Posted: Fri Oct 14, 2016 1:41 am Post subject: |
|
|
Yes.
_________________
1979 924 NA race car H-Prod SCCA
1982 924 NA race car - Sold
1981 924 Turbo sold
1982 924 Turbo sold
1972 911 E race car - traded for Cayenne Diesel
1975 914 1.8 Building for H-Prod SCCA |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
924 FAQ (Technical)
