924Board.org

morghen · Joined: 21 Jan 2005 Posts: 9095 Location: Romania

are these still available for purchase?
i've noticed that two of the injector bungs have worn thread and they dont seal properly anymore.
_________________
Supercharger and EFI kits
https://www.the924.com

Grenadiers · Posted: Wed Aug 24, 2011 9:32 am Post subject:

Not sure on new, but I should have some used ones. If all 931 bungs are the same of course!
_________________
'83 944 Track car.
'88 924S Track car.
'89 944 Turbo
2004 Winnebago Vectra monster RV
2012 Jeep Wrangler
2014 Kia Soul
2001 Ford F350 powerstroke

morghen · Joined: 21 Jan 2005 Posts: 9095 Location: Romania

thanks, i've been promised a couple of bungs

it appears they are not the same.
my 81 has all plastic ones and my 82 has plastic + metal nut ones.
_________________
Supercharger and EFI kits
https://www.the924.com

ideola · Joined: 01 Oct 2004 Posts: 15550 Location: Spring Lake MI

The updated version with the metal insert is still available new. I believe the all-plastic version has been deprecated.
_________________
erstwhile owner of just about every 924 variant ever made

stevekat · Joined: 19 Jan 2008 Posts: 719 Location: Los Angeles, CA

Last I recall they were available, somewhat reasonably priced, and were the metal with plastic.
_________________
"Never get out of the boat. Absolutely goddamn right. Unless you are goin' all the way."

Gone to new home: '81 924T, US version, CGT Intercooler, UTCIS-PT, Euro DITC, Greddy Trust MBC, Forged Fuchs Flat Dish 6's, Factory Recaro's.

Elektrobank · Posted: Tue Aug 30, 2011 7:12 am Post subject:

morghen · Joined: 21 Jan 2005 Posts: 9095 Location: Romania

i got a set from gegge, thanks a lot !
and thank you guys for your offers !
its nice to have a comunity that is ready to help

this week i hope i can start her up

_________________
Supercharger and EFI kits
https://www.the924.com

Elektrobank · Posted: Wed Aug 31, 2011 4:18 am Post subject: