924Board.org

Joes924Racer · Posted: Mon May 03, 2010 7:11 am Post subject: Where can I get one.

Im looking for the black protector on the front of this fender 4 my
project gt turbo look alike.

_________________
1979 porsche 924 Na
1980 porsche Turbo 931GT Replica
Have u ever driven a turbo.

Rich H · Posted: Mon May 03, 2010 7:52 am Post subject:

?? Which bit?
_________________
1994 Lotus Esprit S4 - Work in progress...
1980 Porsche 924 S2 DITC Turbo - Original spec
1978 Homo-Sapiens - Tired spec
1953 Landrover S1 - Pensioner Spec

Joes924Racer · Posted: Mon May 03, 2010 8:02 am Post subject:

Rich the black road garbage protector stuck to the outside.
Suppose I could make my own though Id like to get a pattern.
_________________
1979 porsche 924 Na
1980 porsche Turbo 931GT Replica
Have u ever driven a turbo.

9XX Girl! · Posted: Wed May 05, 2010 7:01 pm Post subject:

Joe, you will have to remove your exhaust, split your brake lines and drop the rear beam to get it off and then take the spring plate off (its under tension - wouldn't want you hurting yourself). Seems like a lot of work for cosmetic reasons. Can't you make a cover for it? Duck tape it and paint it

_________________
924 (84) N/A 2 ltr - 5 Speed - BLACK - Project (looking for 200BHP, any ideas!)
924 (81) N/A 2 ltr - 3 Speed Auto - SURINAM RED (Metallic) - Near Original Spec (sticking with originality)
BOTH ON THE ROAD, BOTH USED EVERY-OTHER DAY

Rich H · Posted: Wed May 05, 2010 8:03 pm Post subject:

I see it now, the black plastic thing stuck on the outside infront of the wheelarch.

Black vinyl?
_________________
1994 Lotus Esprit S4 - Work in progress...
1980 Porsche 924 S2 DITC Turbo - Original spec
1978 Homo-Sapiens - Tired spec
1953 Landrover S1 - Pensioner Spec

Mike9311 · Joined: 14 Dec 2004 Posts: 1798 Location: Chicago-ish

I know there is a material from 3M that is used for invisible bra's. I know this because it is on my BMW. Its stick on and doesn't harm the paint.

Maybe it can be found in black for your 'stone guard' ?
_________________
1980 931 since 1989
1981 Ideola 931 Club Sport
1982 931 Entwicklungsfahrzeug
1979 924 NA ohne 650 mit 471
1982 931 Red Resurrection - 951 IC
1982 931 parts car / resurrection?
1980 924 NA (R&D lightweight)
1982 931 wana-be GTR race car

9XX Girl! · Posted: Thu May 06, 2010 8:22 am Post subject:

Martijnus · Joined: 29 Dec 2006 Posts: 2019 Location: Netherlands

fiat22turbo · Joined: 18 Jan 2006 Posts: 4040 Location: Portland, OR

Mike9311 · Joined: 14 Dec 2004 Posts: 1798 Location: Chicago-ish

Joes924Racer · Posted: Fri May 07, 2010 2:10 am Post subject:

Theres also a no buff tough clear spray coat, I
think nappa carries it. Guess ited look cool 2
mask it out with corners then spray it the bumpers
could get done this way.

It gets really hard. I put a flex
clear on a front valance once and found you didnt need it
_________________
1979 porsche 924 Na
1980 porsche Turbo 931GT Replica
Have u ever driven a turbo.

StienbargerR · Joined: 28 Oct 2005 Posts: 1362 Location: Richmond, IN

I think pelican parts has them. They are rock guards or whatever.
_________________
1978 924 NA
-250lb lowering springs, Euro Pistons

9XX Girl! · Posted: Fri May 07, 2010 6:41 am Post subject:

ideola · Joined: 01 Oct 2004 Posts: 15550 Location: Spring Lake MI

9XX Girl! · Posted: Tue May 11, 2010 4:03 am Post subject:

cool! Now i know

_________________
924 (84) N/A 2 ltr - 5 Speed - BLACK - Project (looking for 200BHP, any ideas!)
924 (81) N/A 2 ltr - 3 Speed Auto - SURINAM RED (Metallic) - Near Original Spec (sticking with originality)
BOTH ON THE ROAD, BOTH USED EVERY-OTHER DAY