nivekrs
Joined: 14 Apr 2010
Posts: 55
Location: Wisconsisn
|
 Posted: Wed May 05, 2010 3:50 pm Post subject: o2 sensor heat shield question |
 |
|
| I just replaced the o2 sensor on my '82na with a new Bosch sensor which was supposed to work on my '82 924 as well as 911,928,944 and found after I installed it that it was too big for my old o2 sensor heat shield to fit over. Is this a problem if I eliminate it? (The sensor heat shield) I don't want the new sensor to fail early because of this. Thanks for any advice. |
|
Martijnus
Joined: 29 Dec 2006
Posts: 2019
Location: Netherlands
|
| Posted: Wed May 05, 2010 11:28 pm Post subject: |
|
|
I'm not familiar with the 924 heat shield itself, but you can make a heat shield yourself from aluminium.
I believe I found a pic on the megasquirt site, but I can't find it 
_________________
"Rule: Turbo's make torque, and torque makes fun." (C. Bell)
924 "50-jahre", 1981.
MSII/extra, LPG, ITB's, 5lug.
To be turbo'ed in a while.
Killed her at the Nurburgring, Porscheless at the moment |
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
924 FAQ (Technical)
