924Board.org

jhazels · Posted: Tue May 05, 2009 6:41 pm Post subject: Clutch kit for 924 turbo

Hello everybody - I have a significant clunk around the gearbox in the rear of the car. There is also a certain slackness in the rear wheels when the car is jacked up and in gear. I have diagnosed it as a bad clutch where I think the centre goes.

Is there a suitable clutch kit? If so which one is best and where can I source one and for how much - I am in Australia. I also need a clutch master cylinder.

Thanks - John H
_________________
The Australian Motorist

elitejaso · Joined: 24 Jul 2007 Posts: 143 Location: Melbourne

What you want is a SACHS clutch kit.
Porsche will probably charge you at least $2000 for one so i recommend lookin in the states. Alot cheaper even with the exchange rate.

Try searching www.stoddard.com have bought most of my items from them in the past and they're not as expensive.
Otherwise heres one kit for sale on ebay, will cost just under $1000 AUSD to have it shipped to your door.

http://cgi.ebay.com/ebaymotors/SACHS-1980-82-PORSCHE-924-2-0L-TURBO-CLUTCH-KIT-KF20002_W0QQcmdZViewItemQQ_trksidZp3286Q2em63Q2el1177QQhashZitem320366988989QQitemZ320366988989QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

Good luck
_________________
1981 924 turbo (daily driver)

Rasta Monsta · Joined: 12 Jul 2006 Posts: 11733 Location: PacNW

Don't forget your clutch slave. . .if you master is bad, the slave is likely close behind.
_________________
Toofah King Bad

WeiBe (1987 924S 2.5t) - 931 S3

jhazels · Posted: Wed May 06, 2009 11:03 am Post subject: Thanks for your help

Thanks - really appreciated. elitejaso - it seems you have a lot of knowledge - any ideas who can fit it at a reasonable price?
_________________
The Australian Motorist