| View previous topic :: View next topic |
| Author |
Message |
serz

Joined: 22 Aug 2007 Posts: 77 Location: Lithuania
|
Posted: Mon Jun 16, 2008 7:57 pm Post subject: headlights problem - open when off, closes when on |
|
|
So the problem is that it stays open when turned off, and after turning lights on, it coses and enlights under the car
maybe some problem with the button itself - wires conected wrong? Maybe someone has photo of normally working switch? _________________ ex Porsche 924 1978
ex Porsche 924 1982
Now Porsche 924 turbo
http://www.thebestporsche.com |
|
| Back to top |
|
 |
Smoothie

Joined: 01 Jan 2003 Posts: 8032 Location: DE (the one near MD, PA, NJ)
|
Posted: Mon Jun 16, 2008 11:58 pm Post subject: |
|
|
This is in the wrong forum. "How-To"'s start with answers, not questions.
-But your headlights are obviously out of sync. I'd switch them off, unplug the connector at the motor, loosen the nut on the motors' shaft and pry off the small linkage arm there, then reposition the headlights to the down position, reattach the linkage, reattach and tighten the nut. _________________ "..it's made in Germany. You know the Germans always make good stuff."
'82 924T, US version, dark green metallic, 5 speed Audi 016G gearbox |
|
| Back to top |
|
 |
dpw928

Joined: 02 Nov 2002 Posts: 1860 Location: owasso, ok 74055
|
Posted: Tue Jun 17, 2008 12:07 am Post subject: |
|
|
The same thing used to happen on my 80 NA. I could open the hood and tap the connector at the headlight motor and the headlights would retract. The problem was caused by loose/spread female connectors in the plug.
Dennis _________________ 81 931 5 sp
78 928 5 sp Silver
78 928 AT Euro Black |
|
| Back to top |
|
 |
Scorpio

Joined: 05 Jul 2007 Posts: 1957 Location: Brisbane, Australia
|
Posted: Sat Jun 28, 2008 6:13 pm Post subject: |
|
|
What are the brackets on the rear of the headlights for?
mine are connected to nothing and seam to have no purpose but to make a semi circle sweep for no reason ?? _________________ 1979 NA
MS1..EFI..
GARRETT T25 TURBO
BILSTEIN SHOCKS
GT BASED CUSTOM BODYKIT
Brisbane , Australia
Think mean think fast
all youll see is
my Porsches Arse!!! |
|
| Back to top |
|
 |
dpw928

Joined: 02 Nov 2002 Posts: 1860 Location: owasso, ok 74055
|
Posted: Sat Jun 28, 2008 9:37 pm Post subject: |
|
|
There should be stops on them that hold the headlight steady when in the raised position.
Dennis _________________ 81 931 5 sp
78 928 5 sp Silver
78 928 AT Euro Black |
|
| Back to top |
|
 |
Scorpio

Joined: 05 Jul 2007 Posts: 1957 Location: Brisbane, Australia
|
Posted: Sun Jun 29, 2008 7:29 pm Post subject: |
|
|
ah ok..how necessary are they? antone have a piccy of what they look like when up against the stops? _________________ 1979 NA
MS1..EFI..
GARRETT T25 TURBO
BILSTEIN SHOCKS
GT BASED CUSTOM BODYKIT
Brisbane , Australia
Think mean think fast
all youll see is
my Porsches Arse!!! |
|
| Back to top |
|
 |
Ozzie

Joined: 12 Mar 2005 Posts: 4448 Location: Townsville, Qld. Australia
|
Posted: Mon Jun 30, 2008 12:40 am Post subject: |
|
|
Without them the headlights would jump around with every bump.
There is a screw on them with should come against a stop when raised.
Sorry no pics but going to remove my LH one soon- I'l take camera.
 _________________ Porsche 924 1984 (UK import) NA
Its AUTO and its BLACK
Montego Black on black/red
Engineer of Electro/Mechanical Systems Maintenance |
|
| Back to top |
|
 |
|