924Board.org

nesty · Posted: Thu May 15, 2008 9:35 am Post subject: Extended wheels bolts

Hi

I have a set of BBS cross spoke alloys to go on. However need extended wheel bolts does anyone know an outlet that sells them.

Nesty
_________________
Porsche 924 2.0 Litre (1982 model),
Porsche 911, 3.2 Carrera

gohim · Joined: 02 Nov 2002 Posts: 4459 Location: Rialto, CA

How long do you need them?

Porsche used 70mm wheelbolts with the ATS 15" cast BBS lookalike Basketweave wheels.

The only problem is, 70mm wheelbolts are expensive. I think I priced them at about $20 a piece from Porsche years ago. Your best bet would be to see if another 924.org Boardmember has a set for sale. You only need to buy 12 if you use wheel locks (can you believe wheel locks cost less than the damn 70mm wheelbolts?).

Smoothie · Posted: Thu May 15, 2008 12:48 pm Post subject:

If you can use 68mm'ers, this place lists them with the Porsche seat type -
http://www.ecstuning.com/HR/appguides/app_search.cgi?make=&qt=studbolt&model=&thread=14x1.5&submit=Search%21
(scroll down to part number 141568PORSCHE)
_________________
"..it's made in Germany. You know the Germans always make good stuff."

'82 924T, US version, dark green metallic, 5 speed Audi 016G gearbox

morghen · Joined: 21 Jan 2005 Posts: 9102 Location: Romania

Pefa sells them.
i have 100mm bolts on my car since a couple of years now.

http://www.pefa-design.de/
_________________
Supercharger and EFI kits
https://www.the924.com

nesty · Posted: Thu May 15, 2008 7:28 pm Post subject:

Hi

Thanks for the replies. I have found a couple of places that sell them. Just got see if now what style of bolts I require. Either Taperhead or Raduis head bolts.
_________________
Porsche 924 2.0 Litre (1982 model),
Porsche 911, 3.2 Carrera

nesty · Posted: Sun May 18, 2008 5:53 am Post subject:

Hi

A stupid question here. Is the 70mm the thread length or the whole bolt length?
_________________
Porsche 924 2.0 Litre (1982 model),
Porsche 911, 3.2 Carrera

!tom · Posted: Sun May 18, 2008 6:12 am Post subject:

Thread length unless it's a flathead screw.
_________________
78 924 NA
5-lug