924Board.org

[Buwani 931]

I have a few questions as recently my 2nd radiator fan has been coming on if I turn the fan on, no matter where the controls are.


1- How does the top control lever work. Does is sit down in the groove until it goes to the far right, then stepping up a groove, closing the circuit?
2- Is it the top lever that signals the AC?
3- Does this signal go directly to the AC relay or to a switch before that?
4- For the 2nd fan to come on, the blower -fan setting is at 1 2 or 3 but not zero with the ac on?

Shawn
_________________
1980 931
That's thirty minutes away. I'll be there in ten.