| View previous topic :: View next topic |
| Author |
Message |
Robb Northrup
Joined: 11 Oct 2006
Posts: 49
Location: Mesquite, Nevada
|
 Posted: Thu Nov 08, 2007 12:16 pm Post subject: Where do I locate the Oxygen Sensor reset button on 1980 924 |
 |
|
I replaced the sensor on Saturday, following the directions given by my trusty Haynes manual. But I could not find a reset button on the left inner fender as explained by the manual. I did find an odd plastic connector for the Oxy sensor wire, located on the steering crossmember. Could this be the reset button?
Robb |
|
| Back to top |
|
 |
Paul
Joined: 02 Nov 2002
Posts: 9491
Location: Southeast Wisconsin
|
| Posted: Thu Nov 08, 2007 12:25 pm Post subject: |
|
|
That's not it.
Follow the speedo cable from either end and you will find it. Unless of course someone removed it by installing a single piece speedo cable!
_________________
White 87 924S "Ghost"
Silver 98 986 3.6l 320 HP "Frank N Stein"
White 01 986 "Christine"
Polar Silver 02 996TT. "Turbo"
Owned and repaired 924s since 1977
Porsche: It's not driving, it's therapy. |
|
| Back to top |
|
|
Rasta Monsta
Joined: 12 Jul 2006
Posts: 11733
Location: PacNW
|
| Posted: Thu Nov 08, 2007 2:11 pm Post subject: |
|
|
When you find it, the short end of a small allen key (say, 4mm) works great to reset it.
_________________
Toofah King Bad
- WeiBe (1987 924S 2.5t) - 931 S3
|
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
924 FAQ (Technical)
