| View previous topic :: View next topic |
| Author |
Message |
BillA
Joined: 27 Dec 2002 Posts: 170 Location: Syracuse, NY
|
Posted: Sun Sep 02, 2007 9:02 pm Post subject: Fuse question |
|
|
I noticed that the #9 fuse on my 78 was blown. I did a search in the tech section and Haynes, but I cannot find what this goes to. Everything I found is for 79 and on and that indicates that it is a spare. Does anyone know what this goes to? Everything is still workling as far as I can tell.
Bill
Of all the things I've lost I miss my mind the most.
Mark Twain _________________ BillA
1981 931 |
|
| Back to top |
|
 |
Smoothie

Joined: 01 Jan 2003 Posts: 8032 Location: DE (the one near MD, PA, NJ)
|
Posted: Mon Sep 03, 2007 12:18 am Post subject: |
|
|
Fuse "S9" shows at the upper-right of page IV of the '77.5-'78 wiring diagram on Haynes pg.255 - for the horns. _________________ "..it's made in Germany. You know the Germans always make good stuff."
'82 924T, US version, dark green metallic, 5 speed Audi 016G gearbox |
|
| Back to top |
|
 |
BillA
Joined: 27 Dec 2002 Posts: 170 Location: Syracuse, NY
|
Posted: Mon Sep 03, 2007 8:40 pm Post subject: Fuse question |
|
|
Thanks Smoothie, you are right, I was not thinking, right after I posted this I went back to the Haynes manual and looked in the electric schematics and sure enough there it was it is for the horn.
Thanks! _________________ BillA
1981 931 |
|
| Back to top |
|
 |
|