924Board.org

stevencrichton · Joined: 25 Jul 2006 Posts: 40 Location: Scotland

Anyone in scotland know of any breakers that might have doors with glass in them, or anyone know how to re-bond the steel onto the bottom of the glass, as I have not opened the drivers window now for almost 4 months

The interior blower does better anyway due to the car's aerodynamics being so good nothing comes into the car air wise.
_________________
I had a diesel now own a porsche and my little pocket is crying in pain

DOCO · Posted: Sat Nov 11, 2006 8:36 am Post subject:

no problem bro .take out your window and the window regulator,clean out the slot where window was in,take some black silcone and squrit it into the channel now put in the window into the slot.it will have to set 24 hrs.to bond properly.....
_________________
Doco "where am i going and why am i in this handbasket"author unknown
79 924 N/A "Webster"
_______
/______\
[+]___[+]
\0 924 0/
[__]..[__]
"WEBB STR"

crazyinkc · Joined: 10 Nov 2002 Posts: 226 Location: Olathe KS

You want to use black urethane. I tried black RTV one and it held for 2 days. Make sure both the glass and the bracket are clean of all old urethane, rust, oil, etc. I clean everything with alcohol before I glue them back together.

DOCO · Posted: Tue Nov 14, 2006 6:42 am Post subject:

really ive never had a problem with silicone its holding my 62 comets in fine,but whatever works
_________________
Doco "where am i going and why am i in this handbasket"author unknown
79 924 N/A "Webster"
_______
/______\
[+]___[+]
\0 924 0/
[__]..[__]
"WEBB STR"