Show full size 924Board.org
Discussion Forum of 924.org
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
 Technical FAQ924 FAQ (Technical)   Technical924 Technical Section   Jump to 924.org924.org   Jump to PCA 924 Registry924 Registry

My Serpentine (or whatever) Belt Broke!!
Goto page 1, 2  Next
 
Post new topic   Reply to topic    924Board.org Forum Index -> General Discussions
View previous topic :: View next topic  

Sell the 924 and back-up car for a Lancia?
Yes, ditch the b!tch
22%
 22%  [ 2 ]
No, stick with it till you are broke
77%
 77%  [ 7 ]
Total Votes : 9

Author Message
N-Dub  



Joined: 16 Jan 2006
Posts: 219
Location: Salt Lake City, Utah

PostPosted: Sun Apr 30, 2006 2:02 am    Post subject: My Serpentine (or whatever) Belt Broke!! Reply with quote

So I was out on a joyride with my father and heard a pecular squeel coming from the engine bay. I ruled it out as just a squeeky belt and kept driving. I watch my gauges probably more than I check my mirrors, and the voltage gauge starts to go down a bit. THis was interesting but had happened before. The battery light turned on. Once again interesting but hadn't ever happened before. The temperature gauge was on the rise and not stopping. Luckily I was within a quarter mile from my house when the temp went in and off of the red. A suspicious popping sound had just started. So we coasted almost all the way home with the heater on. I popped the hood when I got home to see the Audi, he he he, coolant tank's fluid boiling. Now I am smart enough to not open the lid while it is boiling, so I got a fan to aid the cars fan. I found bits of the belt in the engine bay, but the main belt was gone somewhere down the road.
How much should a new belt run?
Is it so easy as to unbolt the alternator and slip on the new belt?

Input would be appreciated,
Nate
_________________
'79 924 now Totaled! Carrera GT bodywork for sale!
'87 951
Back to top
View user's profile Send private message
Tigger937  



Joined: 11 Apr 2004
Posts: 919
Location: PCA Milwaukee Region

PostPosted: Sun Apr 30, 2006 2:29 am    Post subject: Re: My Serpentine (or whatever) Belt Broke!! Reply with quote

N-Dub wrote:
How much should a new belt run?
Is it so easy as to unbolt the alternator and slip on the new belt?

Input would be appreciated,
Nate


Be thankful it wasn't the timing belt.

Belts are cheap, $10-$20. Just loosen the alternator mounting bolts, slide it over, slip the belt on and tighten.

Hopefully the cylinder head gasket didn't lose seal from the overheat.
_________________
1981 931 (Concours)
1982 931 (Daily Driver)

"Think outside the box"
Back to top
View user's profile Send private message
924RACR  



Joined: 29 Jul 2001
Posts: 9112
Location: Royal Oak, MI, USA

PostPosted: Sun Apr 30, 2006 2:47 am    Post subject: Reply with quote

Yeah, uh, people, pay attention!!! How many occurrences of this have we had in the past couple of months?? Somebody loses the belt for the waterpump and alternator, sees all the signs, keeps driving through the overheat, and wonders if they can get away with just replacing the belt???

GET WITH THE PROGRAM, PEOPLE!!!

Do NOT drive the car when the temp's in the RED, unless you LIKE doing headgaskets!!! WTF!?! I can swap them in 3 hrs, and I still don't like doing them.

REPLACE YOUR BELTS NOW, if you haven't already. There's no excuse for this kind of failure. Just how flexible and functional do you think rubber is after 20 years??? Would you drive on 20-year-old tires?? I sure as hell hope not.

And the belts are cheap and easy to replace. IF you don't know how old they are? Pitch 'em. Timing belt's around $8USD, alt/water pump belt is around the same. You need these to keep driving your car.

Plan ahead, or suffer the consequences.

'Nuff said.
_________________
Vaughan Scott
Webmeister
'79 924 #77 SCCA H Prod racecar
'82 931 Plat. Silver
#25 Hidari Firefly P2 sports prototype
Back to top
View user's profile Send private message Send e-mail Visit poster's website
924RACR  



Joined: 29 Jul 2001
Posts: 9112
Location: Royal Oak, MI, USA

PostPosted: Sun Apr 30, 2006 2:48 am    Post subject: Reply with quote

PS - if you can't keep track of replacing stuff like belts on a 924 - you're definitely not up for handling any Italian machinery...
_________________
Vaughan Scott
Webmeister
'79 924 #77 SCCA H Prod racecar
'82 931 Plat. Silver
#25 Hidari Firefly P2 sports prototype
Back to top
View user's profile Send private message Send e-mail Visit poster's website
N-Dub  



Joined: 16 Jan 2006
Posts: 219
Location: Salt Lake City, Utah

PostPosted: Sun Apr 30, 2006 7:42 am    Post subject: Reply with quote

Just for the record, 924RACR, I didn't overheat.
_________________
'79 924 now Totaled! Carrera GT bodywork for sale!
'87 951
Back to top
View user's profile Send private message
Paul  



Joined: 02 Nov 2002
Posts: 9491
Location: Southeast Wisconsin

PostPosted: Sun Apr 30, 2006 8:33 am    Post subject: Re: My Serpentine (or whatever) Belt Broke!! Reply with quote

N-Dub wrote:
The temperature gauge was on the rise and not stopping. Luckily I was within a quarter mile from my house when the temp went in and off of the red. A suspicious popping sound had just started. So we coasted almost all the way home with the heater on. I popped the hood when I got home to see the Audi, he he he, coolant tank's fluid boiling.

Input would be appreciated,

Nate


Dude, this is the definition of overheating!
_________________
White 87 924S "Ghost"
Silver 98 986 3.6l 320 HP "Frank N Stein"
White 01 986 "Christine"
Polar Silver 02 996TT. "Turbo"
Owned and repaired 924s since 1977
Porsche: It's not driving, it's therapy.
Back to top
View user's profile Send private message Send e-mail
Paul  



Joined: 02 Nov 2002
Posts: 9491
Location: Southeast Wisconsin

PostPosted: Sun Apr 30, 2006 8:36 am    Post subject: Reply with quote

You will need to replace the belt and bleed the cooling system and hope like hell that you have not warped your cylinder head.

NEVER DRIVE A CAR WITHOUT A WATER PUMP BELT!!!

Once again the idiot lights are smarter than the driver.
_________________
White 87 924S "Ghost"
Silver 98 986 3.6l 320 HP "Frank N Stein"
White 01 986 "Christine"
Polar Silver 02 996TT. "Turbo"
Owned and repaired 924s since 1977
Porsche: It's not driving, it's therapy.
Back to top
View user's profile Send private message Send e-mail
Chrenan  



Joined: 15 Jan 2003
Posts: 3903
Location: Canada

PostPosted: Sun Apr 30, 2006 8:38 am    Post subject: Reply with quote

Agreed, that is overheating.
_________________
1987 951 - M193 Version for Japan
Back to top
View user's profile Send private message
Tigger937  



Joined: 11 Apr 2004
Posts: 919
Location: PCA Milwaukee Region

PostPosted: Sun Apr 30, 2006 8:49 am    Post subject: Reply with quote

N-Dub, unfortunately, these cars are very sensitive to overheating. Once the needle hits the red, usually it's too late. The fact the coolant started boiling and you had a popping sound is not a good sign. I would not get my hopes up. You're probably going to need a head gasket at the very least. If not, consider yourself lucky.

All you can do now is replace the belts, top off the coolant, bleed the cooling system and test it out while keeping a close eye on the coolant level and looking for excessive pressure buildup in the overflow tank, oil in the coolant and/or coolant in the oil. The damage, if any, will already have been done.

N-Dub wrote:
Luckily I was within a quarter mile from my house when the temp went in and off of the red. A suspicious popping sound had just started.

Now I am smart enough to not open the lid while it is boiling, so I got a fan to aid the cars fan.


Hopefully, these actions saved your head and gasket. Good luck.
_________________
1981 931 (Concours)
1982 931 (Daily Driver)

"Think outside the box"
Back to top
View user's profile Send private message
Paul  



Joined: 02 Nov 2002
Posts: 9491
Location: Southeast Wisconsin

PostPosted: Sun Apr 30, 2006 8:59 am    Post subject: Reply with quote

You should drain your oil before doing anything else and see if there is any coolant in it. Ignore this and you may need new rod and main bearings very soon.
_________________
White 87 924S "Ghost"
Silver 98 986 3.6l 320 HP "Frank N Stein"
White 01 986 "Christine"
Polar Silver 02 996TT. "Turbo"
Owned and repaired 924s since 1977
Porsche: It's not driving, it's therapy.
Back to top
View user's profile Send private message Send e-mail
Paul  



Joined: 02 Nov 2002
Posts: 9491
Location: Southeast Wisconsin

PostPosted: Sun Apr 30, 2006 9:03 am    Post subject: Reply with quote

BTW it is very common for a water temperature gauge to actually read lower once the coolant starts to boil. It was designed to measure the temperature of a liquid, not air pockets.
_________________
White 87 924S "Ghost"
Silver 98 986 3.6l 320 HP "Frank N Stein"
White 01 986 "Christine"
Polar Silver 02 996TT. "Turbo"
Owned and repaired 924s since 1977
Porsche: It's not driving, it's therapy.
Back to top
View user's profile Send private message Send e-mail
D Hook  



Joined: 02 Nov 2002
Posts: 3158
Location: Omaha, NE

PostPosted: Sun Apr 30, 2006 1:28 pm    Post subject: Reply with quote

Before you slip on the new belt maybe you ought to see why the old one broke. Water pump or alternator locked up?

BTW, you need to add more choices to your poll.
_________________
'80 924 n/a SOLD
Back to top
View user's profile Send private message Send e-mail
timstar92404  



Joined: 22 Sep 2004
Posts: 2075
Location: richmond BC

PostPosted: Sun Apr 30, 2006 7:45 pm    Post subject: Reply with quote

that happened to me before but I was like 2 minutes from home the belt wasn't tight enough and it came off, I didn't know while driving, my battery light came on and I thought my alternator was bad.

belt is easy to change, you adjust the tightness of the belt my moving the alternator
_________________
78 924 sold.
85.5 944
Back to top
View user's profile Send private message
924RACR  



Joined: 29 Jul 2001
Posts: 9112
Location: Royal Oak, MI, USA

PostPosted: Sun Apr 30, 2006 10:32 pm    Post subject: Reply with quote

Paul's right.

Having the belt come off, rather than break, is far more likely and common - this can be caused by old, worn out alternator bushings allowing the pulleys to be misaligned. However, there's no good reason to keep driving it hot. Even my mother knows better than that - she parked it and called me!!! It's right in the owner's manual - turn it off and let it cool fully before driving again.
_________________
Vaughan Scott
Webmeister
'79 924 #77 SCCA H Prod racecar
'82 931 Plat. Silver
#25 Hidari Firefly P2 sports prototype
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Stu2j  



Joined: 03 Nov 2002
Posts: 1285
Location: Virginia Beach, VA

PostPosted: Tue May 02, 2006 12:25 am    Post subject: Reply with quote

924RACR wrote:
However, there's no good reason to keep driving it hot.

This is why newer cars will simply shut off if they overheat.
_________________
-Stu
924 owner since 1988
924S owner since 2002
Click here to view them:
Back to top
View user's profile Send private message Send e-mail Visit poster's website MSN Messenger
Display posts from previous:   
Post new topic   Reply to topic    924Board.org Forum Index -> General Discussions All times are GMT + 10 Hours
Goto page 1, 2  Next
Page 1 of 2

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group