924Board.org

Belgian924t · Joined: 07 Jan 2006 Posts: 104 Location: Belgium

Hello,

last saturday I started working on a 931 for the replacement of the headgasket, place new waterpump, work on the turbo and some other repairs.

I will post some more pictures as the process goes on.

Next to the 931 is a 993 twinturbo by cargraphic (500+ hp)

_________________
'79 931 with Carrera GT look
'86 944 turbo (sold)
'88 944 turbo S (sold)
'85 911 Carrera 3,2 (to be restored)
'80 911 SC "SOLD"
http://www.cardomain.com/ride/2224272

Paul · Posted: Tue Feb 07, 2006 11:21 am Post subject:

Stuff some paper towels in the turbo inlet and outlet before something falls in there....
_________________
White 87 924S "Ghost"
Silver 98 986 3.6l 320 HP "Frank N Stein"
White 01 986 "Christine"
Polar Silver 02 996TT. "Turbo"
Owned and repaired 924s since 1977
Porsche: It's not driving, it's therapy.

Belgian924t · Joined: 07 Jan 2006 Posts: 104 Location: Belgium

The turbo is cooked and also has to go off the car.

_________________
'79 931 with Carrera GT look
'86 944 turbo (sold)
'88 944 turbo S (sold)
'85 911 Carrera 3,2 (to be restored)
'80 911 SC "SOLD"
http://www.cardomain.com/ride/2224272

Paul · Posted: Tue Feb 07, 2006 11:56 am Post subject:

If your clutch needs to be replaced soon, I'd yank the motor at this point....
_________________
White 87 924S "Ghost"
Silver 98 986 3.6l 320 HP "Frank N Stein"
White 01 986 "Christine"
Polar Silver 02 996TT. "Turbo"
Owned and repaired 924s since 1977
Porsche: It's not driving, it's therapy.

Belgian924t · Joined: 07 Jan 2006 Posts: 104 Location: Belgium

The clutch was done some 20000km before. It is not my car, it is one that I am maintaining.

greetz
_________________
'79 931 with Carrera GT look
'86 944 turbo (sold)
'88 944 turbo S (sold)
'85 911 Carrera 3,2 (to be restored)
'80 911 SC "SOLD"
http://www.cardomain.com/ride/2224272