924Board.org

924-76 · Joined: 05 Jun 2006 Posts: 1489 Location: Ontario, Canada

Hi!
I bought a rear spoiler for my 924 and I have no idea how to instal it on my car???

If you can send my some explanation whit good picture that could help me.
Thank!

Lizard · Posted: Tue Jul 04, 2006 11:27 am Post subject:

we see you have a 1976 924, but what style of spoiler, if it is a 944 spoiler, and you are attempting to add it to a non spoiler hatch you have two options, you can either remove the bolts from the spoiler and glue it onto the hatch, or you can drill holes through the hatch to mount it, but if you drill the holes be very careful as if you nik the glass with the drill bit then you could shatter the rear window.
_________________
3 928s,

Vince Ponz · Joined: 02 Nov 2002 Posts: 3581 Location: Florida

Glue it if you want I would not drill holes unless you want to buy a new hatch. The spoiler hatches had a space that the screws or bolts went through. ON the older hatches glass filled in that space. I tried to do the drilling and was successful in drilling one hole and I stopped. I bought a 944 hatch.
_________________
"Never let them see you sweat"
77.5 924 modified track car
79 931 Euro stock
88 924S SE
87 911 Targa stock

Vince Ponz · Joined: 02 Nov 2002 Posts: 3581 Location: Florida

Sorry to yell at you but if you do not tell us where you are how can we help you. I have an extra hatch. Even if you told us just your state that would help. But it is stupid not to tell us where you are within 400 miles. This goes for all you guys and gals who do not fill out the profile. I am tired of trying to help only to find that you will not identify where you are. Who are you afraid of?
This is directed to all who want to remain invisible.
_________________
"Never let them see you sweat"
77.5 924 modified track car
79 931 Euro stock
88 924S SE
87 911 Targa stock

924-76 · Joined: 05 Jun 2006 Posts: 1489 Location: Ontario, Canada

Sorry about that.
I'm in Ontario, Canada, close to Ottawa.
And it is a 944 spoiler with bolt in that I want fit on my euro 924, 76.
I didn't know that there special hatch for those.
You recommend me to glu it, how?

Lizard · Posted: Tue Jul 04, 2006 1:34 pm Post subject:

normally you would use glue to glu it to the hatch,

use an apoxy or ask a glass shop to do it for you, but you will need to remove the bolts from the wing first
_________________
3 928s,

PORSCHEV · Posted: Tue Jul 04, 2006 8:53 pm Post subject:

Welcome to the board. I also have a 76 euro and was born in Ontario..what part are you in?
_________________
1976 924
5 lug conversion, 17'C2 wheels,custom body work,327 vette engine.

1978-#53 "D" track racer.

924-76 · Joined: 05 Jun 2006 Posts: 1489 Location: Ontario, Canada

Thanks for the tip on the glue.

And I from Quebec, but living in Petawawa for now.