Show full size 924Board.org
Discussion Forum of 924.org
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
 Technical FAQ924 FAQ (Technical)   Technical924 Technical Section   Jump to 924.org924.org   Jump to PCA 924 Registry924 Registry

Pressure Bleeder is Great!

 
Post new topic   Reply to topic    924Board.org Forum Index -> 924S Discussions
View previous topic :: View next topic  
Author Message
Paul  



Joined: 02 Nov 2002
Posts: 9491
Location: Southeast Wisconsin
PostPosted: Sun Aug 08, 2004 8:32 am    Post subject: Pressure Bleeder is Great! Reply with quote
Replaced my clutch master cylinder today, and all brake pads, and flushed and changed my brake fluid.

This made it easy:



All I did was install the master cylinder, hooked up the bleeder, jacked up the front of the car, removed the starter, opened the slave bleeder screw, left it flow about 30 seconds until the fluid was clean and bubble free. Checked the clutch pedal, it worked fine the first push! I didn't even prime the master cylinder.

While I had it hooked up, I replaced all brake pads with Mintex silver, and changed the brake fluid by opening each bleeder valve in order. NO PUMPING THE PEDAL....SWEET!
Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   Reply to topic    924Board.org Forum Index -> 924S Discussions All times are GMT + 10 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group