| View previous topic :: View next topic |
| Author |
Message |
FAUST
Joined: 20 May 2003
Posts: 5
Location: Massachusetts
|
 Posted: Mon May 10, 2004 12:19 am Post subject: Wheel spacer removal? |
 |
|
| I scored a set of 16" disc wheels, 6X16, (928 look alikes) in a junkyard. The wheel spaces used in the rear just rest on the extended lugs and came right off. The front spacers are fixed and my manual doesn't even mention them. How do I get them off? |
|
| Back to top |
|
 |
Paul
Joined: 02 Nov 2002
Posts: 9491
Location: Southeast Wisconsin
|
| Posted: Mon May 10, 2004 12:45 am Post subject: |
|
|
| There's bolts between the lug bolts. |
|
| Back to top |
|
|
gohim
Joined: 02 Nov 2002
Posts: 4459
Location: Rialto, CA
|
| Posted: Mon May 10, 2004 6:32 am Post subject: |
|
|
You're talking five bolt "trashcan lid" wheels, right?
The 924 version is a 16 X 6, but the 928 version is 7s, with more offset.
The 924 version did not use spacers in the front, and with spacers would probably stick out farther than the fenders.
The 928 version, when installed at the front, because of the extra offset might need spacers to clear the springs. |
|
| Back to top |
|
|
John Brown
Joined: 07 Nov 2002
Posts: 903
Location: Leesburg VA
|
| Posted: Mon May 10, 2004 11:25 pm Post subject: |
|
|
The 928 version fits. It's tight but it fits. Tire specific clearance issues possible and negative camber is limited. Street settings are fine.
_________________
John
80 931 - #931 44Cup
99 Escalade - tows track cars
gone but not forgotten: original 924.org car - 82 |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
924 FAQ (Technical)
