924Board.org

ProudGecko · Joined: 26 Nov 2002 Posts: 129 Location: Indiana

I'm testing my engine temp sensor and I can't figure out which pin is number 13 on the DME connector. Does anyone have a picture or something w/ the pin numbers labeled?

Thanks

P.S. any other ideas as to why my car won't start in the cold would be appreciated.
_________________
1988 Porsche 924S
1986 Kawasaki Concurs ZG1000
1984 Mercedes 190D
1973 Honda CB500

ljd 924SE · Joined: 04 Dec 2003 Posts: 30 Location: Tallahassee, FL

my car sometimes had starting issues due to a bad ground preventing any juice from getting to the starter. i'd get out of the car, wiggle the cable a little and she'd start right up. it's the negative cable coming off the battery, grounding on the bellhousing. the problem was permanently solved by purchasing a ground cable kit from iceshark which is available at www.gururacing.net for $44. now, if your car is turning over and won't start, i don't know what to tell you. but if it's not, try wiggling that ground cable and maybe you'll have the problem solved.
_________________
'88 924S Sport Edition
http://www.cardomain.com/id/ljd924se