| View previous topic :: View next topic |
| Author |
Message |
dial67
Joined: 07 Apr 2013 Posts: 20 Location: DeRidder, LA
|
Posted: Tue Apr 09, 2013 11:36 am Post subject: Second try |
|
|
 |
|
| Back to top |
|
 |
dial67
Joined: 07 Apr 2013 Posts: 20 Location: DeRidder, LA
|
Posted: Tue Apr 09, 2013 11:40 am Post subject: Third try |
|
|
 |
|
| Back to top |
|
 |
Karpaazio

Joined: 03 May 2011 Posts: 121 Location: Finland
|
|
| Back to top |
|
 |
dial67
Joined: 07 Apr 2013 Posts: 20 Location: DeRidder, LA
|
Posted: Wed Apr 10, 2013 2:57 am Post subject: |
|
|
| I am not sure of the exact turbo model. It is a T25 that I got for $20.00 used. It runs about 6-7 lbs thru the FMIC. I have a PLX M300 that I plan to check the AFR. Right now I am working on the Turbo Fueller for ignition control and fuel enrichment. Once I get the TF unit running I will upgrade the turbo to a GT2860RS. I will post more pics shortly. |
|
| Back to top |
|
 |
dial67
Joined: 07 Apr 2013 Posts: 20 Location: DeRidder, LA
|
Posted: Wed Apr 10, 2013 10:45 am Post subject: Injector mount |
|
|
Here is a pic that shows the two injectors mounted. This was a primary rail from a 1993 Mazda RX7.[img]http://imageshack.us/a/img407/1127/sdc10093z.jpg
[/img] |
|
| Back to top |
|
 |
dial67
Joined: 07 Apr 2013 Posts: 20 Location: DeRidder, LA
|
Posted: Wed Apr 10, 2013 10:55 am Post subject: |
|
|
 |
|
| Back to top |
|
 |
dial67
Joined: 07 Apr 2013 Posts: 20 Location: DeRidder, LA
|
Posted: Wed Apr 10, 2013 11:00 am Post subject: Turbo and downpipe |
|
|
This pic shows the adapter plate for the turbo and downpipe. |
|
| Back to top |
|
 |
dial67
Joined: 07 Apr 2013 Posts: 20 Location: DeRidder, LA
|
Posted: Wed Apr 24, 2013 11:12 am Post subject: Test run |
|
|
| I got the PLX hooked up today and found that the engine was running to lean. The 3mm screw to adjust the AFR is gone. I do not think that there has been one on the fuel dizzy as long as I have had the car. I removed all the shims from the pressure regulating valve and was able to get a fair AFR. I have not turned up the boost passed 7lbs yet. Between 5-7lbs I am seeing 12:1 to 10.5:1 on the CIS only. I have no need to add fuel from the extra injectors at this time. The GT2860RS is the next step along with a knock sensor. |
|
| Back to top |
|
 |
Karpaazio

Joined: 03 May 2011 Posts: 121 Location: Finland
|
|
| Back to top |
|
 |
flosho

Joined: 01 Jul 2004 Posts: 3160 Location: Eau Claire, Wisconsin
|
Posted: Sat Apr 27, 2013 6:50 am Post subject: |
|
|
13.5 is generally pretty lean for a turbo car, unless you raised the control pressure after the video? I would want to see the afr closer to 11.8-12.2 at wot. _________________ [This Space For Rent] |
|
| Back to top |
|
 |
Karpaazio

Joined: 03 May 2011 Posts: 121 Location: Finland
|
Posted: Sat Apr 27, 2013 7:02 am Post subject: |
|
|
Going to run it more rich flosho, as the video shows it was the first test run and it ran like that. Maybe tomorrow if I got time I will tune it closer to 12  _________________ Porsche 924 1978 Cabrió:
http://www.garaget.org/?car=219790
Porsche 924 widebody (next up?)
Toyota Crown LS110 1983:
http://www.garaget.org/?car=260537
Audi a6 2.7tt quattro 2000 daily driver |
|
| Back to top |
|
 |
Arvidw

Joined: 20 Sep 2009 Posts: 227 Location: The Nederlands (Europe)
|
Posted: Sat Apr 27, 2013 7:39 am Post subject: |
|
|
That sounds promising, very nice uncomplicated build  _________________ Porsche 924 2.0 Kompressor 136.1wHp @ 5650rpm / 201.9wNm @ 3900rpm (dyno @ dp-engineering.nl) |
|
| Back to top |
|
 |
morghen

Joined: 21 Jan 2005 Posts: 9102 Location: Romania
|
Posted: Sat Apr 27, 2013 6:26 pm Post subject: |
|
|
it actually looks nicer in the videos than in the pictures  _________________ Supercharger and EFI kits
https://www.the924.com |
|
| Back to top |
|
 |
Karpaazio

Joined: 03 May 2011 Posts: 121 Location: Finland
|
Posted: Sat Apr 27, 2013 7:02 pm Post subject: |
|
|
I just adjusted the mixture, ran on 3rd gear wot with 12,4 AFR. I have to get new water temp meter because the car got overheated when I got home and the meter was in the midle of cold and red... :/ _________________ Porsche 924 1978 Cabrió:
http://www.garaget.org/?car=219790
Porsche 924 widebody (next up?)
Toyota Crown LS110 1983:
http://www.garaget.org/?car=260537
Audi a6 2.7tt quattro 2000 daily driver |
|
| Back to top |
|
 |
Raceboy

Joined: 01 Mar 2004 Posts: 2327 Location: Estonia, Europe
|
Posted: Sun Apr 28, 2013 6:41 am Post subject: |
|
|
It's not the meter, it's the head gasket. _________________ '83 924 2.6 16v Turbo, 470hp
'67 911 2.4S hotrod
'90 944 S2 Cabriolet
'78 924 Carrera GT replica
'84 928 S, sold
'91 944 S2, sold
'82 924S/931 "Gulf", sold
'84 924, turbocharged, sold.
http://www.facebook.com/vemsporsche |
|
| Back to top |
|
 |
|