924Board.org

Dutch924-racer · Joined: 23 Jul 2007 Posts: 1081 Location: The Netherlands

I have bought a Dansk exhaust for my 924 turbo.

The Dansk has fitting at the rear silincer for the later type of mounting. On my 931 (1979) I have the early type of mounting with the clamp around the silencer.

The problem is that silencer of the Dansk is much smaller then te original damper, so the clamp is way to big.

Does anybody had the same problem ?

Number 12:

_________________
937 trackday car
Series 2 engine
951S turbo and intercooler
Fast road camshaft
Forge recirculation valve + boost controller

9xx · Joined: 18 Jun 2006 Posts: 627 Location: Jarvenpaa, Finland

Yes I had the same problem. Also the clamp would continuously drop of from its hanger (part number 11) with Dansk exhaust. I ended up drilling two holes to both hanger and clamp and then bolted them together. But it is only a temporary solution because as you said, the silencer is too small for the clamp and therefore rattles annoyingly.

_________________
Mikko

All gone: 931 '82 Alpine White, original option "220" G31 with LSD + 3 x 944

Joes924Racer · Posted: Mon Aug 30, 2010 4:23 am Post subject:

Yup been there doner that. I got rid of alot of stuff... maybe to much..
I utilized what was offered and bought more parts. Another of these helped hang it. From the list part #19 and 20 and 17. All replaced
parts # 12 and 10. Though you could modify number
if you cut and weld.

Cheers.
_________________
1979 porsche 924 Na
1980 porsche Turbo 931GT Replica
Have u ever driven a turbo.

Dutch924-racer · Joined: 23 Jul 2007 Posts: 1081 Location: The Netherlands

there must be a clamp from another brand car that will fit................
_________________
937 trackday car
Series 2 engine
951S turbo and intercooler
Fast road camshaft
Forge recirculation valve + boost controller

Joes924Racer · Posted: Mon Aug 30, 2010 5:44 am Post subject:

Im sure of it. Its time to look around
_________________
1979 porsche 924 Na
1980 porsche Turbo 931GT Replica
Have u ever driven a turbo.

ideola · Joined: 01 Oct 2004 Posts: 15550 Location: Spring Lake MI

Odd. My Dansk muffler came with a clamp and fits perfectly on the factory hanger setup. Mind you, this is on SONIC, an 81 NA, not a 931...was there a changeover between 79 and 80 on the muffler hanger setup???
_________________
erstwhile owner of just about every 924 variant ever made

moorepower · Posted: Tue Aug 31, 2010 7:58 am Post subject:

Yeah, the Dansk on my '81 has a much smaller clamp than the stock one. The new exhaust should have come with one.

Of course my system was bought about 3 years ago. Maybe they stopped including the clamp?
_________________
Dan.

'88 924S-LE (Luddite Edition)
Manual steering, manual sunroof, manual windows, AC delete, cruise delete, M030 Konis, 25.5mm torsions, 26.8/20 sways

Dutch924-racer · Joined: 23 Jul 2007 Posts: 1081 Location: The Netherlands

Was the Dansk clamp also stainless ?
_________________
937 trackday car
Series 2 engine
951S turbo and intercooler
Fast road camshaft
Forge recirculation valve + boost controller

moorepower · Posted: Thu Sep 02, 2010 7:13 am Post subject:

Yes, mine was stainless.
_________________
Dan.

'88 924S-LE (Luddite Edition)
Manual steering, manual sunroof, manual windows, AC delete, cruise delete, M030 Konis, 25.5mm torsions, 26.8/20 sways