Show full size 924Board.org
Discussion Forum of 924.org
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
 Technical FAQ924 FAQ (Technical)   Technical924 Technical Section   Jump to 924.org924.org   Jump to PCA 924 Registry924 Registry

need help guys.

 
Post new topic   Reply to topic    924Board.org Forum Index -> General Discussions
View previous topic :: View next topic  
Author Message
mantise  



Joined: 21 Apr 2005
Posts: 46
Location: Brooklyn

PostPosted: Fri Jun 10, 2005 1:17 pm    Post subject: need help guys. Reply with quote

hi, today i installed a cold air intake. and i had a little problem not with the installation. i broke a peice that has something to do with the intake. i'll trie to describe it as best as i could. it the piece that looks like a T but with one side sticking up it is hollow and has air flowing through it. it could be found under the intake peice that kind of looks like a U that plugs into the throthle. I know it has something to do with air becouse the car startles and then turns off if i don't hit the gas. if my explanition is ban the piece looks like this


[ ]
[ ]
[ ]
========= =========
0
======================

this is how it looks from top view. the part where the 0 is where it rases maybe half an inche and goes into the U intake that plugs into the throthle with the filter on the other end. Throtle one side filter other side. the other 2 peices in the picture are clapped and lead into wires don't know where. hope i described it good. now my problem is i broke it. trying to remove the U intake part. i didn't know it was under there. so does any 1 know where i could purchase this peice or tell me the name of it so i could search for it or something. thanks in advance guys.
Back to top
View user's profile Send private message
mantise  



Joined: 21 Apr 2005
Posts: 46
Location: Brooklyn

PostPosted: Fri Jun 10, 2005 1:19 pm    Post subject: Reply with quote

ok picture didn't come out so good.
here it is again


.................[..]...................
.................[..]...................
.................[..]...................
.................[..]...................
========..==========
0........................................
===================
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    924Board.org Forum Index -> General Discussions All times are GMT + 10 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group