| View previous topic :: View next topic |
| Author |
Message |
Joes924Racer

Joined: 03 Nov 2002 Posts: 11964 Location: Oregon, Denver Colorado native!
|
|
| Back to top |
|
 |
Joes924Racer

Joined: 03 Nov 2002 Posts: 11964 Location: Oregon, Denver Colorado native!
|
Posted: Mon May 30, 2005 3:59 pm Post subject: |
|
|
Ended up getting it off the ground, wheels off
repacked front bearings,checked brakes
repainted rear hubs and all 4 calipers
a color called radiant red had a quart
of it layen around ..So I grabbed a paint
brush and rebrushed them after cleaning
with purple meanie[similiar to simple green].
things to do before prepping for paint next week.
roll front fenders. Yes I think Ill go with a bat
and roll out the top of my fenders also need to
raise 944 catback muffler ...
Oh yea my front valance hits the curb now with the 944
front valance if Im not careful the curb is pretty
abrasive dont get to close or the bottem lip will
catch it happend to me being in a hurry & did
some uneeded damage.
though tire rubbing on the front fenders is an issue
and if I go into and run through a curve aggesively at
high speed Ill definately dnf with a ruptured front sidewall
its bad enough that the heat bubbles paint. _________________ 1979 porsche 924 Na
1980 porsche Turbo 931GT Replica
Have u ever driven a turbo. |
|
| Back to top |
|
 |
Joes924Racer

Joined: 03 Nov 2002 Posts: 11964 Location: Oregon, Denver Colorado native!
|
Posted: Mon May 30, 2005 5:06 pm Post subject: |
|
|
Cant try the mc if Im not sure where the lines go.
Do they go to the same holes as a 4 bolt drum disc set up
mc. _________________ 1979 porsche 924 Na
1980 porsche Turbo 931GT Replica
Have u ever driven a turbo. |
|
| Back to top |
|
 |
PORSCHEV

Joined: 02 Nov 2002 Posts: 1901 Location: Cedar Lake Nova Scotia, Canada
|
Posted: Tue Jun 07, 2005 9:13 pm Post subject: |
|
|
Joe..could you take a pic of the other side of the MC...I want to see if the lines are in the right place for me.
Thanks |
|
| Back to top |
|
 |
|