924Board.org

Darin81T · Joined: 03 Sep 2003 Posts: 124 Location: Vader, WA

The cheapest one I could find was at Pelican Parts for $106.60. Does anyone know if there is a cheaper one out there?

I got a pressure plate and clutch disk for $150 on Ebay, hoo ah! If I have enough free time, I might get to start tuning my MegaSquirt within the next few weeks.

Later,
Darin Flynn

numbbers · Posted: Tue Feb 15, 2005 11:51 am Post subject:

Well, I don't think I paid that much for my release bearing, last year, and I think I bought it at Pelican, but it might have been Pap Parts. But, maybe they have went up.

Anyway, be sure you change the two needle bearings for the clutch fork also. They are not expensive, and they will be worn out.
_________________
1980 924 Turbo

Darin81T · Joined: 03 Sep 2003 Posts: 124 Location: Vader, WA

I'll check out Paps parts. Thanks for the heads up on the needle bearings.

-Darin Flynn

CMXXXI · Joined: 05 Nov 2002 Posts: 1939 Location: Vicksburg, MS

I got the throwout bearing at GermanParts.com for $96.95 just over a year ago. Fork bearings at the same place for $11.57 each. Also got the pilot bearing from them for $9.95.

It isn't the slickest web site, and you will need part numbers to find stuff easier, but their prices at the time were the best I could find. Haven't done business with them in a while, but when I did, I had no "issues" with availability or high shipping prices, etc, etc. YMMV

T/O Bearing= 931.116.082.04
Fork Bearings= 999.201.213.00
Pilot Bearing= 931.102.111.00
_________________
'79 Eurospec 931