924Board.org

Sounds like I need to wiggle it from around the pickup. Wish me luck! Thanks.

The engine is still installed on the car, and the cross member/steering rack has been removed. I neglected to mention that there is an EGR line that goes under the pan. At first I thought that the li ...

The pan itself is loose and I'm able to move it around. I tried to loosen the left hand engine mount thinking that would give enough clearance but still no luck.

Awesome vid, thanks for sending. I tried to loosen up the left engine mount thinking that was the interference but still can’t get the pan down. Beyond frustrating.

I have finally gotten the fasteners from the oil pan and it should be dropping but it seems to be hung up somewhere on the left rear. I have the 3 bolts out from the bell housing so I don’t believe ...

it's a little bolt on the bottom of cross member inside that concave portion, that or unbolt the bracket from behind the alternator. If I remember, its a pain to get that lower nut off if it's seized ...

Trying to get my crossmember off....how do you access the dampner for removal? Thanks in advance.

Hey all. I just about have the cross member on my 1978 NA pulled but there is a dampner (or other attaching hardware) that's preventing me from removing it from the car. The Cross Member part number ...

I'm in the process of getting to my leaking oil pan from underneath and I’m looking for some guidance on how to remove the steering gear from the lower steering column. I’ve removed the nut and bo ...

Hello all. Looking for a fuel line the comes from the tank and into the fuel filter. I'm looking for part number 477 209 075. I anyone has one in decent condition, or has a line on one please send me ...

Chuck,

I figured out how to create and install the jumper. I could hear the fuel pump running as soon as the connection was made.

Interesting thing is that the start process sounded the same ...

Does anyone know if the vacuum line routing is the same for the 1978 NA? I got mine started, and runs at idle. But as soon as I try to add power the engine starts to cut out. I'm wondering if I have ...

Is there a link or photo tutorial on how to properly jumper the fuel pump relay 30 to 87? Thanks in advance.

Much appreciated. Thank you!

Ok - I can't remember where I read this (Haynes manual or here)....but I removed the air filter box and raised the air sensor unit sensor plate and heard fuel moving thru the system (ignition switch i ...