924Board.org

But really you need to get a pressure gauge, there must be a thread around somewhere on how to make one cheaply?

Full details on making your own on here, plus other Tech help, but you will need t ...

I went back and removed number four injector. When I pushed the plate up it shot a tremendous amount of fuel out. When I assembled the distributor head I didn't add any shims to up the pressure.!
...

Rebuilding a fuel distributor is not something to be undertaken lightly and i admire you for doing so. However it often results in failure which is why there are professional firms carrying out this w ...

Before I mount it back in the car my question is...... Should the piston move freely in the barrel? Mine won't. Does fuel pressure control the movement or do I have a big problem?

Piston MUST mov ...

Supplier in UK, items also refer to VW parts used in 924

https://www.heritagepartscentre.com/uk/porsche/924/brakes.html

Virtually all of the rear drum components are from the early VW Bug, try a supplier of these parts.

The fuse/relay layout above will be fine for your car.

I've just clocked 86, about the same as the mileage on my 924. I find these days pushing the seat fully back when entering or leaving the car makes life easier. I do wish I'd thought to keep one of th ...

Plenty of info on line https://youtu.be/ySdtAHvKEeE

Well, I actually used a needle valve from ebay (£10 needle valve) - you just get rid of the frequency valve on the side of the fuel distributor and put the needle valve instead.

By doing that ...

Wait so that fuel pump is not actually doing anything? Its all just the pump up in the engine bay (if I remember the diagram correctly)? The fuel is just passing through but no actual pump action? ...

Hey Guys,

think I need to figure out what I even have left of the oem system though before I can go further with that thought process because this is what I found at my rear fuel pump: We tried ma ...

This may help with setting the idle mixture https://youtu.be/1mA2BA598_4

The idle speed scew is on the throttle body, both need setting together.

Not to sure about flushing the tank with water ...

Glad you are getting a result.

As posted above, change the oil as a priority, if you haven't flushed the gas tank, be prepared to replace the fuel filter a couple of times, kjet and the pump do no ...

I note you feel confident that you have fuel, but if it not reaching the injectors, then it is no help! Pull an injector and lift the fuel flap gently (all switched on) to se if injector sprays. When ...