924Board.org

ok . I replaced my fuel filter and torqued down the fittings and no matter what shims i used an how much i tightened or didnt tighten the thing is leaking. WTF! its the same filter I had before d ...

"sorry. but we are going to have to turn our back on you." http://i1004.photobucket.com/albums/af162/Hunnamunnafeeb/1z3w6md.gif

ban him. send him to vwvortex.

V R 6. . . . . http://www.youtube.com/watch?v=IYSk9tLIagE

grind off the head of the bolt and separate
attack the shaft with the vice grips- should be easy

do this. . .

My buddy's Isuzu Stylus

http://i95.photobucket.com/albums/l145/Sm0ke_Crims0n/flamageStylus1.jpg

what the hell is going on here!?

tommy likey

Tell us more about this temp switch.

ok. I installed a temp guage about 2 weeks ago and while installing the sensor I must have knocked the lead off the stock sensor. I noticed the sputtering ...

I got it!!! a lead on the temp switch was off. . . I put it back on and inside of 5 minutes the sputtering was gone. . . wierd right?

Vac. leak ?? thats what Im thinking. . . i tried something a few minutes ago. . . i let you guys know tommorow if it worked or not. . .

so I re timed the 80 and while driveability improved, im still having the same problem. Ill be driving and the car is doing beautifully. then 10 mins later it will start sputtering at throttle like ...

take it one step at a time before replacing pumps. with the key in the on position, take some wire and jump the thermal temp switch. (its a plug with 2 wires coming out on the right side of nthe ra ...

I was all like http://i952.photobucket.com/albums/ae1/caseyaaronsmih/thsimpsons.jpg

lean on them about it or it will sit for years. . . trust me I know from experience.

go to www.photobucket.com . . open a free acct and upload photos. after that take the "image link" and copy and paste into your post. . . presto.