924Board.org

Maybe the threaded union has damaged threads or it’s a little loose inside the filter housing? Looks like it’s replaceable.

PN. 059115721

Here’s a pic of the pipe with the water pump removed. Ignore the blue circle, separate issue I was having.

https://thumbs2.imgbox.com/9d/5c/tztY8iAq_t.jpeg

got me back to 10psi.

Welcome back. Once you've turned up the boost it's difficult to dial it back.

So I've heard.

Yeah, it's not much but you can definitely feel the difference.
...

Yup, that was it. Started by turning the valve completely counter-clockwise and then made adjustments turning clockwise. Approximately 2 complete turns clockwise got me back to 10psi.

No idea why ...

This is my temporary set up and recognize that it isn't ideal.

https://i.imgur.com/QsiIGLl.jpg

It does take some fiddling to get the boost level right. I found that even a 1/4 turn can mak ...

3 turbos have sold this year on BAT. Prices always seemed a little inflated to me on that site, not to mention the 5% fee added to the final selling price. They are nice examples however.

https://b ...

— not 924board.org related—

Nice Porsche 924 Baseball cap …by Porsche.
Small 924 embroidery in the side pannel of this dark blue cap.
The inside of the bill/visor is in black & white Herringb ...

Thanks Mike. I think I found the info I was looking for in your post and as well as this older post I found from Ideola...

http://www.924board.org/viewtopic.php?p=373550&sid=38b373d3e9170b4e150 ...

I think I’ve read that it’s possible to install an intercooler with an S1 setup, but as I understand, there are more options for an S2. For the purpose of installing an intercooler, what parts are re ...

After finally getting the screens removed I cleaned it up in an ultrasonic cleaner.

CIS pressure (3rd) test results:

Ambient temp | 22C | 72F
System Pressure | 6.0 bar
Cold Pressure | 2.7 bar ...

Yeah, it looked fine. Nothing was gummed up. I figured the problem/blockage might be in the screen, but I couldn't remove it. Still cant, i'm guessing its soldered in place cause I can't remove the pi ...

Got it out and honestly didn’t look too bad at first glance except there was only a screen inside one of the ports, is that correct? Tried removing the screen and f#@%ed it. I thought the screens shou ...

Well, if you are sure you have you valve on your tester wide open for the control pressure test, it would seem that then next thing to do would be to remove the WUR and either replace it, or try takin ...

Here are my results after adding the Techron. I also drained the gas tank and cleaned the screen on the in-tank pump. Verified the injectors where shooting a good spray pattern with similar volumes be ...

I suppose it won't hurt to do both. I just happen to be at about a 1/4 tank so I'll go ahead and the techron. How long would you suggest running the "jumped" pump?

I'll be sure to check t ...