924Board.org

My 1978 924 is a n/a engine and I am having the same problem with lots of pressure when I remove the gas cap after driving. I know the bleeder valve is no longer available so can I just remove the va ...

I have a 1978 924 non turbo engine and wondered which fuel injectors you are using? I have been looking and finding different numbers for the Bosch injectors.

Thank you.

I went through the relays and found one slot empty, that not the problem though. I will try the 12v to the motor to see if that may be the problem.
Thank you.

Hi, I have a 1978 - 924 with a/c, (it has 2 fans.) The driver side fan will kick on when the temperature starts to rise too high, but the regular fan is never on, any suggestions?
Thank you,
Gary

I have a 1978 924 Limited Edition NA needing rear shocks, does this have a sport suspension? This model does have a rear sway bar.
Thank you.

Thank you all for the suggestions, I guess I will have to get the round one and see if it will fit in the original location. I correct one looks like garbage, but I think it may work for a while long ...

I am really looking for the Beru w18-2f which is the exact replacement, but I did buy another one similar to that on eBay but made for a Mercedes. It is not the exact same but similar.
I can get t ...

Hi, I have a 1978 Porsche 924 and found your old post regarding trying to get the fan resistor: Beru WZ18-2f. I know this was a long time ago but wondered how you made out and if you located that part ...

Hi, I am looking for a front caliper rebuild kit for my 1978 924 non turbo 4 lug wheels with solid rotors, any ideas? EBay has some but seems geared toward the slotted rotors. Dealer has to get them ...

Hi, I have a 1978 - 924 non turbo and am installing the tie rod ends and ball joints etc. The passenger side was 16 1/2 turns out and the drivers side was 14 1/2 turns out. BTW, all the parts are ori ...

Need a control arm for my 78 924 (MK1) but it needs the sway bar mount. I can get a control arm but where can I get the sway bar mount separately and have it welded on?
Thank you.
Gary

I recently used about a tablespoon of baking soda and poured in a little white vinegar. Pour slowly as it will foam out quickly. I then let is sit for a couple hours and then flush it out with water u ...

Hey "Hans"
I just bought a 1978 924 and need some screws, I noticed that you are making yours race ready. I need the screw that holds the small panel between the rear window and the rear ha ...

Hey Eric P, I wondered where you were in NY, thanks for the offer but I do have the socket, but the plug is a bit stubborn. I have been soaking in with PB Blaster and have not messed up the plug.... ...

Thanks for the information, I ordered some Red Line synthetic 75/90 and best best price I found was on eBay, I bought a 3 pack. Now to try and get the plugs out, seems like this is the original gear o ...