924Board.org

so far so good. no issues to report. side note, i have purchased a innovate lc-1 wide band monitor. i am hoping get the o2 bung welded in before this weekend so i can play with afr tuning. stay tu ...

I am going to try and remove them with this cheapy tool:

http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=96296

If that doesn't work I will use the hammer and tightly fit long so ...

anyone know where i can find a key/socket for these wheel lug locks:

http://mhenderson.dyndns.org/PhotoLibrary/0d76c7ca-d09d-4fe9-bd4e-20dcc7cf1615/941ceaa2-aeb2-4bdd-9a84-b6f796f5d609.jpg

looks like they had a earlier version of this product as the one i installed does not have a pressure gauge built into it.

http://www.pelicanparts.com/catalog/shopcart/911M/POR_911M_FULcis_pg11.htm

Guys just to let you know I am the one paulc20 got the info from. I posted this on my favorite 928 ( Landsharkz ) forum a few days ago which is based for australia. I am not afilliated with the comp ...

I have only been running with it for about 2 weeks. I will keep the board updated on its performance.

The unit ships with a map which is supposed to be a sort of starter universal map. Your car s ...

Exactly. I think it is a happy medium between mechanical ( heated metal and spring ) control and EFI. The unit gives very percise control over the control pressure ( to .1 bar or 1.4 PSI ) where as ...

It has been a while and I have since moved to the 928 model. Still have my 931 but it is going to be sold sometime in the future. But I thought I would share a neat product I found for my 928 that I ...

FYI, my order finally shipped and should be here on Monday 5/14/2007. That's a long turn around but after speaking with someone at DC Automotive, they never answered my emails, I found out that there ...

I ordered a couple of parts for my 928 last Monday ( 4/30/2007 ). According to the UPS tracking number they emailed me the parts still have not shipped, only the billing information has been received ...

bass gt,

Did you fabricate something a joint that connects the turbo and the silicon tube running into the intercooler or did you fasten the silicon tubing directly to the turbo outlet?

I am running a 951 performance cat-back on my 931 and I think I noticed a slight change in the spool up of the turbo. Seemed to start to spool up at a lower RPM. The exhaust is somewhat louder, stai ...

The sound is present when I spin either side while keeping other the from moving.

I will check to see how it sounds with the car in gear. Although the car was in gear when I was puilling from the ...

CV Joints appear fine. Boots are still intact and bolts are tight. I thought it might be a bad joint but I think the sound is coming from insde the tranny case. What are the symptoms of a failing/f ...

My 931 has developed a nasty loud knock coming from the rear. I was in first gear pulling from a light when I heard the sound and drove it to the shoulder. Car has been towed and is now in my garage ...