924Board.org

not to be a party-pooper, but you will find, as i did, that after spending all that effort to get the ac working again, the cabin fan will never blow the cold air hard enough to cool you off, except m ...

i have bought two resistors in the last year, they are marked 1.8 ohm......
they keep opening up, the last one was only on the car a couple months.
i saw a thread here that suggested the value shoul ...

^+2

mine would only spray on two injectors, only when coaxing the throttle
could i get enough pressure to spray all four, was the dizzy. $$$

i need to take a better picture, but there is an old one if you follow the www link in
my sig.........the wheels are TSW......note the date on that web page - 2001.....in person
the paint is really ...

THANKS Smoothie!!! runnin good!

i finally gave up and bought a rebuilt fuel distributor..... that solved my
pressure problems and after setting the air-fuel mixture according to
smoothie's excellent instructions the car runs very ...

THANKS!!! i'll give that a try this weekend, pretty cold mornings right now

i actually had less leakage with the wheel grease, but still seeping out between the two halves, the permatex gasket fai ...

http://img46.imageshack.us/img46/401/head005800x600hu5.th.jpg

is that the way the alum washers go - or are they upside down?
check out all the rust, ewwwwww

i can find the o-ring between the dizzy and the air metering assembly,
and i can find the cork gasket between the air metering assy and the air filter box, ( both shown in PET).
but i can't find tha ...

anyone have any part numbers needed to replace the o-rings and gaskets in the fuel distributor? i'm gonna attempt this weekend....wish me luck lol

Anybody ever heard of the hydraulic method of removing a pilot bearing? It is alot easier than the above.

yes, i tried that, with messy results lol

bro, that is one of the hardest parts i ever changed,
i tried different pullers and hammering on the wrench,
eventually i got it out with just tightening down a bolt threaded
thru the bushing and p ...

the two cylinders that were firing had a 12MM head, and the interior of the bolt was .050, and the others two were 13MM

mine were like that too, i think maybe the banjo bolts that go in the
i ...

hey y'all,
i'm not a PCA member, but i just noticed the Brumos
Swap Meet on my calender for Saturday, 10/20 in Jacksonville.
I probably won't make it, but thought i'd remind you locals

ok there was only about 250ml at the cold start valve, so i then disconnected the input to the filter and tested, same - about 250 ml........i pulled the fuel
pump and it really looks laquered up on ...