924Board.org

Cool info Thanks guys..

Regs Chris

Heat Shrink Tubing Hey! Cool idea Dudes Thanks

So I take it no one here has replaced them with new ones?

Regs Chris

Hi Guys,
Can you buy new fuel lines that go from the fuel dizzy to the injectors? The rubber parts on mine are looking a little tired. If so where from?

Thanks Chris

Thanks guy's ..

Looking at what's is to stop these screws coming out on the two TB's that I have looked at is the end of the screw is burred over or center punched out, but remember mine broke beca ...

I was driving along when without any warning, a major drop in power and a very bad sounding engine…? Stopped the car ASAP and checked under the hood, nothing out of place here? Restarted the engine an ...

I'm glad we got that sorted.... (I was worried I put mine in ass about...)

Regs chris

The arow should be pointing for the fuel flow into the fuel dizzy? should it not? rember that our cars are right hand drive.

Regs Chris

Hey witch way is your fuel filter pointing too? front or back?

Was just looking and the pic of your engine bay.

Regs Chris

Hi Guy's, does anyone out their run a K&N Air Filter in a 931? If So do you have the part number for this?

Any help would be great.

Thanks Chris

Hi Kye,

My boot guage starts to move at 2000 RPM and then hits 10 psi at 2800 RPM. My Car is stock with STD K26 KKK turbo. Not sure why yours only hits 10 psi @ 4000 RPM's? How many Km's on the clo ...

OK Cool thanks guys, I'll check this all out and see what I find. But I had a quick look at the Carcoal Can and mine only has two connections on it ??? 1st to the "T" junction and Purge Valve and 2nd ...

Ok lets see now, the following is what I can work out from the Haynes man:

10 comes from the air cleaner to the Charcoal Can. (My car has no pipe here)
15 is the Vac from after the throtle body? ( ...

Thanks again guy's this now all sorted, lined up the rotor with mark on the dizzy, all looking good now.

Thanks for you comments and info

Regs Chris

Hi Guys, I was wondering if any one out their can tell me where the Purge Valve gets connected to as mine has been disconnected?

This Valve has three connections to it. 1. to the Charcoal canister, ...

Thanks for this dude... will check it out tonight.

Regs Chris