924Board.org

That's a very tempting offer! Thank you.

Thank you for the reply. I need to replace the rocker panel, (the metal portion under the door sill), from the point where the front fender ends to a point about 6" behind the jacking point inde ...

So no one knows if a 944 rocker panel will fit or work on a 924S body without modifications?

Would anyone on this forum know if 924S rocker panels are interchangeable with 944 rocker panels?

Thanks

Thank you Rasta. However I'm not talking about the handle removal and installation. I'm looking for info and guidance on the removal of the entire internal mechanism, (inside the door), and door lat ...

Really? No one has removed the entire interior door lock\latch assembly and is willing to share the experience and what to look for/avoid, etc?

I'm hoping someone can help me, or provide some guidance with completely changing out a 924S, (or regular 924/944), door latch mechanism and latch assembly? I'm about to tackle the project on the pass ...

I attempted to straighten the linkage and the installed the handle 5 more times, (1/2 turn on the adjustable socket each time from 1/2 to 2 and 1/2 turns), without any success. I then decided to fabr ...

Ozzie,

I thought about straightening the bends a little on the linkage but am a bit concerned about alignment. I'll give that a try first and if it doesn't work I can always buy a new linkage ass ...

Ed,

That's what is stumping me, (The longer the linkage, the easier it will be to open since it is pushing down). I've got the adjustment out as far as I can without losing the clip and the door s ...

I've encountered a problem with the repair of my passenger side door handle that really has me stumped. I would really appreciate some suggestions/help figuring this one out. The roll pin that attac ...

Harm... In response to your myth statement, attached are from the Rennlist Forum:

From: Sheepdog Sheepdog@aol.com
To: ElFishBoy@aol.com
Subject: Re: Door Handle Woes

The door handles are th ...

I've read enough forums to know that somewhere someone has a part from another brand, vehicle or model that fits and functions, (maybe with minor modifications), on our vehicles. For example, I've rea ...

Thank you sir. I've been searching Pelican and can't seem to locate the thread you are referring to.

Is there a procedure for testing both the Bleeder Valve, (pt # 810201186A) and the Shutoff Valve, (pt # 92820108302) on an 87' 924S? I'm in the middle of a fuel tank conversion and have these valves ...