924Board.org

+1 with the idle time. I replaced the bushings in my turbo 4yrs 50000 miles ago and have had no issues. I always let the car Idle 3-5 mins after driving. This can be annoying if you are in a hurry but ...

Thanks Rasta It has been more than 4 years but I have not forgotten how much fun I had rebuilding the turbo.

Hi everybody, As I was under my car to asses a clutch slave leak I noticed two broken exhaust manifold studs. Looking from above I found another one. That is three out of the 5 I can see! This car has ...

Has anyone made a924/931 for this game yet? My sons are wild about GT Legends. They have recently found a 935 for the game. It would be cool to be able to race our own cars

Welcome
As a kid I always liked porsches but thought i could never own one. Thirty years later I own 2, one is 36 years old (911) one 27(931). I find both cars fantastic. They are very different car ...

I had good results with mine, new bushings,had hotside crack welded,I drilled out coked up oil journals. Marked everything beforehand and worked carefully. almost 2yrs and 13000 miles good so far.

I had my cracked housing welded when I replaced the bushings. That was 10000 miles ago, so far no issues. The welder was very experienced, and knew what he was doing. I'm sure more have done the same. ...

While chasing an oil leak I found mine had come loose where the mounting bracket joins the turbo body. The bracket was still tight to the block. Those socket heads were tricky to get at without pulli ...

Hi. sounds like a great upgrade. I would be cautious when bending those steering arms though. It will obviously change the toe spec but it will most likely also change the ackerman angle(toe out on tu ...

Thanks for the speedy reply Paul. That explains the price difference.

Clarence

Hi, thinking of carrying a spare fuel pump relay and PET seems to show only one for the 924 (433906059) yet when I search suppliers I get a part number with 931 xxx xxx... and it is way more expensive ...

Thanks for the replies and thanks Paul for the warning! My hood closes but it is close to the strut. If I put my hand in the NACA duct and push slightly it will touch, so I will change the strut mount ...

Hi,I have some KYB strut inserts coming for my 81 931 and I am curious about what they refer to when they list "Except Sport Susp" My car has neither Koni nor Bilstien but rather a standard ...

Mike it is the steel pressure line that starts in front of the fuel tank and runs down the rear bulkhead in front of the torsion bar tube near the left rear wheel and under the body to the left front ...

Thanks,Paul. What size is the line and What size are the fittings?