924Board.org

thanks Morghen

I hope you are right and I hope it is sooner rather than later

Sean

although I am hoping this is more of a "see ya later" sadly I had to sell my 924 - financial and some health hiccups along the way made it too hard to keep up the way that I wanted to and I ...

thanks - I was kinda leaning that way

I did a quick test drive after bleeding, adjusting and tugging on some of the suspension. I did not hear anything while it was on the stands.

I noticed a thump thump sound when coming to a stop ...

thanks everyone

I believe the '79 has an "x" connection - front rt. with rear left and visa versa

I did find some older posts on here that used a passat set-up I will check the other ...

Stefan

What is this new option, Passat ? is this something that you have tried?

yes - I replaced everything a year or 2 ago - but admittingly, I am not 100% sure about them - I do not have any vibration so I thought the bearings may be ok (also new) the car did not behave this w ...

Thanks Stefan

I replaced the rubber with the braided hoses - I think a year or 2 ago - does not mean it could not fail - I had hoped at the time that it would be better. I will try the other thing ...

Hey everyone

on my last drive out I noticed a strong pull to the left (drivers side - US) and on a hunch - I checked the brakes to see if something was binding - when I jacked the car, I tried spin ...

Sorry to hear this John -

thoughts and prayers are with you and your family -

Sean

I feel like I am accumulating quite a few of these "stupid questions" lately

has anyone filled the transmission fluid through the reverse plug on top?

Sean

yes everything is working fine - started and ran as it did before.--the check valve that I used is a replacement for the original. I had to use an adapter to get it to fit, but besides that, everythi ...

hey everyone - I wanted to know if anyone has found speed bleeders for the drum brakes? I bought some russell speed bleeders and thought they would work all around but they are quite a bit bigger tha ...

thanks -
I'll grab one of those and give it another go. with how these bolts are on there I almost think it should be one of the first things to try to break loose in the whole process - otherwi ...

how bad/involved is that? would it have to come all the way out or just lowered a little?

as bad as it sounds that may become an option - I don't know how accessible that ball cap on the shift lev ...