924Board.org

I also have an arduino that controls momentary buttons to select D N R like the Roadster, obviously you cannot put it in park as there is no pawl like on the roadster but you could easily use a soleno ...

If you want a file to build a cross member to fit a LDU into the back of a 924/944 I have one. I blew up my car so I’m going to put it in a 986 now. But it fits the 944 incredibly well
https://pho ...

http://i52.photobucket.com/albums/g2/tx541202/B3A64FDA-1835-4DB9-B850-E78ED26F6E3F.jpghttp://i52.photobucket.com/albums/g2/tx541202/86DFD878-8D92-489C-8F0A-869CCE704C47.jpghttp://i52.photobucket.com/a ...

If anyone is interested I will be selling my rover V8 conversion. I have the motor mounted on a motor plate, It jsut requires some plates welded into the chassis to refit and will be the easiest conve ...

Have a lot of axles including an uneven length pair. They are all Porsche but can anyone identify the top 2. For reference the bottom 2 are early offset turbo, the next one up is 924. The ones above I ...

its a ford bolt pattern

oh and if you run into cooling issues, fiat uno turbo rad and fan fit great and keeps mine ice cold

the rover and hte porsche used the same spline drive so thats no help, the PO probably just slapped it in there, if you have the RV8 bellhousing welded to a plate then you can use a 3.0 AP capri clutc ...

944 rear end is the way to go, a turbo would be better but use the 944 ring for better ratio, then if you get an LSD unit it has a cooler on it. Thats what I did, good engine choice LOL

Even stranger is that if the same 9 or 10 people had issues with a hydraulic clutch being too stiff, they would drop the bore size. Shows they do everything without thinking, sometimes you have to exp ...

for the throwout bearing, check out summit racing for there mcLeod one, it's been working well in my cars for many many years

Rick, seems like you have been talking this project for many many years now?

You might want to bleed the system first, it's a slave that is usually changed when it breaks and it never sees a service in it's life time this is normally no.1 culprit. you can change it with axle s ...

Small plastic gear wheel in the speedo breaks/wears out, hence no mileometer, something you will have to live.
In the boot lift up the carpet and the sound proofing, find a large black blind grommet ...

Is the fan on a relay, or are you pulling all that current from a circuit that it shouldn't. Cars rev from cold with no issues but they need more fuel, if your fan is pulling current from your pump yo ...