924Board.org

answered your pm, i may have a replacement dizzy we can try to see if that's your issue . i do think the fuel dizzy is the source of your problem.

okay so after ?? years, I fianlly have a playable racing game set up. I cobbled together an old thrust master wheel and pedals (and i mean old, its a game port model no force feedback, and i had to a ...

the problem with wood is that unless it is very high quality, it is subject to environmental factors. ive seen very nice looking inserts swell, sweat and crack, or develop a haze. Its also more expens ...

at one time i made inserts and had most of the 924 n/a in a very nice simulated dark burl wood, though it came out very nice, i liked it for about three days and peeled it out. ymmv...

ive got a hundred pounds worth of 4 bolt brake and suspension parts, and at least 5 4 bolt wheels, though i wouldn't trust the tires, if you need spares.
id much rather donate them to your cause the ...

common problem, seat rails arent on many maintenance lists...

my solution?

spray the tracks down liberally with a penetrating lube
use a piece of steel rod, old screw driver, etc.. and a bfh ...

Does it give a great improvement in power?
Thanks,
~Frank

no....

Congrats!

Hes pissed off because he cant find a ride home!

http://blog.mlive.com/fullbloom/2008/07/medium_squirrelUp.jpg

Sooo, I fixed it.... momentarily...

after cleaning up the solenoid and reassembling (the piston was stuck pretty good, cleaned, lubed and it seemed towork okay, but was still "sticking" a ...

awesomeness!

the upside is i disassembled my solenoid and the piston was stuck. a little clean up work and all good now. engages and everything. before it put the whole unit back in , i need to figure out the foll ...

going through a similar issues, seems to be common lately.

big wire from battery goes to big terminal on starter (terminal 30). on the same terminal, you will also have two smaller wires, the brid ...

if above fails, follow the hood hinge up below the windshield, and check for rust pin holes in the cowling area. some removal of what used to be rubberized undercoating type stuff may be required, but ...

A friend took the starter for me and load tested it at two different auto parts stores, both said the solenoid is shot, but he also said neither place had anybody with any real knowledge of what they ...