924Board.org

Found that intake boot was cracked on the bottom side....next to the metal clamp. Replaced the intake boot and she's back to life. Thanks.

What observations should I expect if I spray a vacuum line/manifold gasket that's leaking when I'm spraying water mist?

yes.... ....although i've used the old gasket in similar situations in the past in a pinch with no negative results on other cars.

I just completed a timing belt change and while the car was in the garage I cleaned the crankcase breather. I removed the intake manifold in order to gain access to the crankcase breather. Now t ...

I removed the crankcase breather and really had a difficult time prying it out of the block. It was pretty dirty....and I have it soaking in cleaning fluid for the past two days. How is it reinsta ...

Well...I'm going to replace my timing belt and water pump. I see some oil leaking from under cam pulley....and also an oil leak at the bottom at the oil pump seal....so I'm going to replace the front ...

RC..... I had the same posting error and ended-up with two of the same post.

Seems that my A/C compressor is also not lined-up correctly....and the rubber in the mount might be the problem. Where do I find the rubber bushing that goes in the a/c mount? All the rubber is ...

Seems that my A/C compressor is also not lined-up correctly....and the rubber in the mount might be the problem. Where do I find the rubber bushing that goes in the a/c mount? All the rubber is ...

Seems that my A/C compressor is also not lined-up correctly....and the rubber in the mount might be the problem. Where do I find the rubber bushing that goes in the a/c mount? All the rubber is ...

Will the guages from a 924S work for my 79 924? The cluster looks the same but I didn't know if the guages and their connections were the same.
I'm sure someone has tried fitting these already....s ...

The souce of the problem is that there's two rubber covered mounts that hold the top of the alternator and the front mount rubber is completely missing. The mount on the bottom of the alternator co ...

I just put on new belts not long ago and my altenator belt is wearing. After looking at the alignment of the pulleys for the altenator belt....I noticed that the altenator is not sitting straight. ...

I just had the car up off the ground and noticed that there's an antifreeze drip coming from the clutch area. I pulled off the clutch inspection plate and looked up to find a drop of antifreeze on t ...

Are there any pictures of a 924 with tires where the white-letter side of the tires are showing? My 924 has some BFGoodrich TA radials mounted with the black walls out....and if it were any other c ...